| Category | COMMUNICATION |
| Manufacturer | ZENITEL |
ELSIR-10CM
COMMUNICATION
ZENITEL
Themys part number : /
ZENITEL part number : 1023300011
The ELSIR-10CM Ceiling Speaker features a 10W Class D amplifier, utilizing all the power that PoE is capable of. This means that the speaker is capable of delivering up to 96dB SPL (1m), depending on the signal input. The ceiling speaker is designed to be mounted in cut outs in tiles or plasterboard, and is ideal for providing audio to indoor environments where speakers need to be discreet.
The built-in microphone enables new features such as Self-checking, Automatic Volume Control, Ambient Listening, as well as two-way speech via the speaker.
With IP, the system is able to monitor and address each speaker individually. By moving the amplifier from a central unit out to the speaker itself, the need for a central amplifier unit with conventional speaker loops is eliminated. This makes the system highly scalable, and adding another speaker is easy to do.
Even though conventional speaker loops are not used, the speakers can still be divided into groups. These zones can now extend over networks or span the Internet.
To provide maximum availability, the speaker comes with advanced supervision functions. The speaker line test will detect whether there are any faults in the network or speaker electronics. The status of the speaker is reported to the central unit as well as to 3rd-party management systems using SNMP or Syslog
ZENITEL part number : 1023300011
The ELSIR-10CM Ceiling Speaker features a 10W Class D amplifier, utilizing all the power that PoE is capable of. This means that the speaker is capable of delivering up to 96dB SPL (1m), depending on the signal input. The ceiling speaker is designed to be mounted in cut outs in tiles or plasterboard, and is ideal for providing audio to indoor environments where speakers need to be discreet.
The built-in microphone enables new features such as Self-checking, Automatic Volume Control, Ambient Listening, as well as two-way speech via the speaker.
With IP, the system is able to monitor and address each speaker individually. By moving the amplifier from a central unit out to the speaker itself, the need for a central amplifier unit with conventional speaker loops is eliminated. This makes the system highly scalable, and adding another speaker is easy to do.
Even though conventional speaker loops are not used, the speakers can still be divided into groups. These zones can now extend over networks or span the Internet.
To provide maximum availability, the speaker comes with advanced supervision functions. The speaker line test will detect whether there are any faults in the network or speaker electronics. The status of the speaker is reported to the central unit as well as to 3rd-party management systems using SNMP or Syslog
Contact Us
Fields marked by asterisks (*) are required
- THEMYS HQ
-
1746 Route du Stade
13360 Roquevaire FRANCE - info@themys-sa.com
- 04 30 22 02 57
- THEMYS IDF
-
25 Boulevard des Artisans
77700 Bailly-Romainvilliers FRANCE - info@themys-sa.com
- 06 51 50 16 39
- THEMYS NETHERLANDS
-
Voorschoterweg 49-V
2235 SE Valkenburg ZH NETHERLANDS - info@themys-sa.com
- 00 31 61 54 29 65 1
- THEMYS BELGIUM
- Coming Soon
- info@themys-sa.com
Newsletter
Enter your email address to suscribe
